REXPEARL EMA:EB330H、EB230X、EB140F、EB240H、EB440H、EB050S、EB033FC
Typical Properties |
Unit | Test Method |
Melt Flow Rate |
g/10min | ISO 1872-2 |
Density |
g/10min | ISO 1872-1,2 |
MA Content |
wt% | JPE Method |
Tensile Strength at Yield |
Mpa | ISO 1872-2 |
Tensile Strength at Break |
Mpa | ISO 1872-2 |
Tensile Strain at Break |
% | ISO 1872-2 |
Tensile Strength |
MPa | ISO 37 |
Flexural Modulus |
MPa | ISO 1872-2 |
Charpy Impact Strength |
kJ/m2 | ISO 1872-2 |
Tensile Impact Strength |
kJ/m2 | ISO 1872-2 |
Tensile Modulus |
MPa | ISO 527-2 |
Durometer Hardness(Type-D) |
- | ISO 868 |
Durometer Hardness(Type-A) |
- | ISO 868 |
Vicat Softening Point |
℃ | ISO 306 |
Melting Point |
℃ | ISO 11357-3 |
Brittleness Temperature |
℃ | ISO 974 |
Preparation Test Specimens |
||
Characteristics |
||
uses |
EB330H |
EB230X | EB140F | EB240H | EB440H | EB050S | EB033FC |
10 |
6.0 | 2.6 | 6.0 | 18 | 2.0 | 2.0 |
0.933 |
0.935 | 0.942 | 0.942 | 0.942 | 0.943 | 0.937 |
12 |
14 | 20 | 20 | 20 | 24 | 15 |
No-Yield |
No-Yield | No-Yield | No-Yield | No-Yield | No-Yield | No-Yield |
No-Break |
No-Break | No-Break | No-Break | No-Break | No-Break | No-Break |
>400 |
>400 | >400 | >400 | >400 | >400 | >400 |
9 |
9 | 6 | 6 | 6 | 6 | 6 |
55 |
47 | 25 | 25 | 22 | 19 | 37 |
No-Break |
No-Break | No-Break | No-Break | No-Break | No-Break | No-Break |
180 |
190 | 230 | 230 | 220 | 300 | 200 |
51 |
42 | 23 | 23 | 22 | 15 | 35 |
41 |
37 | 32 | 32 | 29 | 30 | 35 |
91 |
89 | 84 | 84 | 84 | 82 | 90 |
61 |
58 | 47 | 47 | 44 | 42 | 49 |
90 |
87 | 77 | 77 | 77 | 73 | |
<-70 |
<-70 | <-70 | <-70 | <-70 | <-70 | <-70 |
Compression |
Compression | Compression | Compression | Compression | Compression | Compression |
●Soft |
●Soft ●Transparency |
●Soft ●Transparency |
●Soft ●Transparency |
●Soft ●Transparency |
●Soft ●Transparency |
●Soft ●High Slip&Anticlock |
●Extrusion Coating |
●Compatibilizer ●Asphalt Modifier |
●Film |
●Extrusion Coating ●Film |
●Extrusion Coating |
●Film ●Sheet |
●Disposable Gloves |